Home » Technologies

Belarus
AridGrow® Technology - is a highly versatile tool for removing thin film of oil and petroleum products on various surfaces. Highly effective to both soil and water. Surface Cleaner for oiled steel, tr...
Belarus
Thin (1 – 3 mm) and ultra thin (0.4 – 1 mm) vapor chambers have been developed for the cooling systems of heat-loaded hard-to-reach electronic components and devices, including cellular phones and tab...
Belarus
Technology of catalytic synthesis of multi-wall carbon nanotubes from propane-butane or ethylene in the fluidized bed reactor has been developed and optimized. The advantages of the technology are unb...
Belarus
Process regulations of thermo-mechanical modification of timber by pressure drop have been elaborated. A pilot facility for industrial optimization of the technology have been manufactured. Thermal mo...
Belarus
The Institute possesses world priority in the field of vital parts treatment technologies, which are based on controllable variation of rheological properties of magnetorheological polishing fluid (MR...
Belarus
The facility design has been developed with combined convection-radiation heat supply. It allows decreasing specific heat consumption for moisture evaporation by 37%, increasing moisture intensity of ...
Belarus
Plasma-arc pyrolysis reactor PP-500 is designed for safe, pollution-free treatment of a wide range of wastes, such as the wastes of wood-working, pulp and paper industries, general mechanical rubber g...
Belarus
The technique of manufacturing of selective-permeability diffusion membranes of a new generation of anodic aluminum oxide has been developed. Diffusion membranes of small thickness (~100 µm) with orde...
Belarus
Micro porous polyamide membranes (MPM) are designed for application in Filtration Unit UF-1 or similar ones used for sanitary and bacteriological analysis of water and aqueous solutions, virologic, mi...
Belarus
The proposed experimental tools allow obtaining a wide range of conditions with the temperatures from 500 K до 5000 K, with typical times of up to 60 ms. For quantitative investigation of the fast-run...
Belarus
To create plasma fluxes of up to 100 kW power, electric-arc RCA-type plasma torches have been developed (RCA plasma torch – rod-cathode arc plasma torch). Such plasma torches allow obtaining plasma of...
Belarus
The Laboratory of Physical and Chemical Hydrodynamics of A.V.Luikov Heat and Mass Transfer Institute has put into operation the up-to-date appliances to perform a wide range of studies of chemical com...
Belarus
Filtration unit UF-1 is designed for sanitary bacteriological analysis of water and aqueous solutions: micro biological, virologic physical and chemical analyses, for analyses in alcohol-free brewing ...
Belarus
A pilot cooling facility has been developed. The equipment allows removing of up to 0.5 MW/m2 from the heated surface at temperature difference of 40°C. The facility has an atomizer and can cool the s...
Belarus
Fabrication and delivery of boiler equipment (small- and medium-power cyclone layer furnace) for combustion of solid biofuels by vortex after-burning of fine fractions and gaseous combustibles in abov...
Belarus
Scanning near-field optical microscope (SNOM) is designed to study the structure and composition of the surface of optically opaque objects. SNOM allows studying the object surface by optical microsco...
Belarus
The plasma accelerator is designed for as follows: o Generating high-energy plasma compression flows for material surface properties modification, which is unacceptable for other techniques; o Solving...
Belarus
The electric resistance chamber furnace with stationary hearth СНО 6.12.4/11-И1 has the following peculiarities: availability of combined lining for heater protection against charge impacts; the inter...
Belarus
The electric resistance chamber furnace with rolled-out hearth СНО 8.16.8/11 has the following peculiarities: the lining of light-weight fiber boards; the heaters of resistance alloys Kanthal A-1; the...
Belarus
High-temperature probe gauge‪‮‫‫ ⁩(600 – 1950°C) is designed to measure temperature of heated media by submerging thermal probes. Thermal probes are produced by applying industrial protective ceramic ...
Show More